Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 2.81 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Shaft Size & Type | 1 in - 6T Spline |
| Flow [Max] | 12 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Duty | Standard-Duty |
| Inlet Pressure [Max] | 2500 psi |
| Corrosion Resistant | No |
| Material | Cast Iron |
| Mounting Hole Size | 3/8 in |
| Mount Type | 4 Bolt |
| Motor Type | Spool Valve |
| Output Torque at Rated PSI (inch/pounds) | 650 in lb |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Max] | 969 rpm |
| Special Features Assembly Code | 0 |
| Port Size | SAE-10 |
| Port Location | Side Port |
| Pressure [Max] | 1800 psi |
| Paint Code | A |
| Mounting Type Code | B |
| Pilot Diameter | 1.75 in |
| Flow Rate | 45 lpm |
| Shaft Type | Splined |
| Series | H Series |
| Port Type | SAE O-Ring |
| Port Size & Location | SAE-10 Side |
| Motor Element | Gerotor |
| Output Shaft Code | 02 |
| Seal Material | Buna-N |
| Special Features Hardware Code | 00 |
| Special Features | None |
| Case Drain | None |
| Case Drain Code | 0 |
| Flange Orientation | Standard |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Splines | 6 |
| Rotation | Standard Rotation |
| Port Code | A |
| Displacement (in³/rev) | 2.81 |
| Mounting Holes | 3/8-16 |
| RPM [Min] | 969 rpm |
| Weight | 11.2 LB |
