Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 2.81 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Max] | 969 rpm |
| Motor Type | Spool Valve |
| Motor Element | Gerotor |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Shaft Size & Type | 1 in - 6T Spline |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 1.75 in |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Shaft Type | Splined |
| Special Features Hardware Code | 00 |
| RPM [Min] | 969 rpm |
| Splines | 6 |
| Paint Code | A |
| Flange Orientation | Standard |
| Port Type | SAE O-Ring |
| Pressure [Max] | 1800 psi |
| Port Size & Location | SAE-10 Side |
| Special Features | None |
| Special Features Assembly Code | 0 |
| Mounting Hole Size | 3/8 in |
| Displacement (in³/rev) | 2.81 |
| Corrosion Resistant | No |
| Flow [Max] | 12 gal/min |
| Case Drain Code | 0 |
| Duty | Standard-Duty |
| Port Size | SAE-10 |
| Mounting Type Code | B |
| Material | Cast Iron |
| Port Code | A |
| Output Shaft Code | 02 |
| Case Drain | None |
| Series | H Series |
| Flow Rate | 45 lpm |
| Mounting Holes | 3/8-16 |
| Bolt Circle Dia. | 3 1/4 in |
| Mount Type | 4 Bolt |
| Rotation | Standard Rotation |
| Output Torque at Rated PSI (inch/pounds) | 650 in lb |
| Weight | 11.2 LB |
