Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Rotation | Standard Rotation |
| Port Location | Side Port |
| Mounting Type Code | B |
| Bolt Circle Dia. | 3 1/4 in |
| Shaft Size & Type | 1 in - 6T Spline |
| Pilot Diameter | 1.75 in |
| Material | Cast Iron |
| Flow Rate | 15 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Splines | 6 |
| RPM [Max] | 152 rpm |
| Mounting Hole Size | 3/8 in |
| Pressure [Max] | 1250 psi |
| Corrosion Resistant | No |
| Special Features | None |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 22.6 |
| Motor Element | Gerotor |
| Duty | Standard-Duty |
| Shaft Type | Splined |
| Case Drain Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Series | H Series |
| Flange Orientation | Standard |
| Port Code | B |
| RPM [Min] | 152 rpm |
| Port Size | 1/2, 1/2-14 |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Seal Material | Buna-N |
| Port Type | NPTF |
| Output Shaft Code | 02 |
| Flow [Max] | 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Hardware Code | 00 |
| Mount Type | 4 Bolt |
| Case Drain | None |
| Mounting Holes | 3/8-16 |
| Weight | 14.7 LB |
