Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Location | Side Port |
| Special Features | None |
| Mounting Hole Size | 3/8 in |
| Displacement (in³/rev) | 22.6 |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Special Features Hardware Code | 00 |
| Material | Cast Iron |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Flange Orientation | Standard |
| Splines | 6 |
| Inlet Pressure [Max] | 2500 psi |
| Port Code | B |
| Mount Type | 4 Bolt |
| Special Features Assembly Code | 0 |
| Port Size | 1/2, 1/2-14 |
| Shaft Type | Splined |
| Motor Type | Spool Valve |
| Port Size & Location | 1/2 in NPTF Side |
| Case Drain | None |
| Port Type | NPTF |
| RPM [Max] | 152 rpm |
| Mounting Holes | 3/8-16 |
| Pilot Diameter | 1.75 in |
| Output Shaft Code | 02 |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Mounting Type Code | B |
| Seal Material | Buna-N |
| Series | H Series |
| Corrosion Resistant | No |
| Case Drain Code | 0 |
| Flow Rate | 15 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Min] | 152 rpm |
| Flow [Max] | 15 gal/min |
| Rotation | Standard Rotation |
| Shaft Size & Type | 1 in - 6T Spline |
| Paint Code | A |
| Pressure [Max] | 1250 psi |
| Weight | 14.7 LB |
