Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Flange Orientation | Standard |
| Shaft Type | Splined |
| Flow Rate | 57 lpm |
| Case Drain Code | 0 |
| Corrosion Resistant | No |
| Splines | 6 |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Special Features Hardware Code | 00 |
| RPM [Min] | 192 rpm |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Type | NPTF |
| Output Shaft Code | 02 |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1350 psi |
| Mount Type | 4 Bolt |
| Port Size | 1/2, 1/2-14 |
| Paint Code | A |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Mounting Holes | 3/8-16 |
| Special Features Assembly Code | 0 |
| Seal Material | Buna-N |
| Mounting Hole Size | 3/8 in |
| Flow [Max] | 15 gal/min |
| Port Code | B |
| Port Location | Side Port |
| RPM [Max] | 192 rpm |
| Bolt Circle Dia. | 3 1/4 in |
| Mounting Type Code | B |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Torque at Rated PSI (inch/pounds) | 3110 in lb |
| Case Drain | None |
| Material | Cast Iron |
| Displacement (in³/rev) | 17.9 |
| Motor Type | Spool Valve |
| Pilot Diameter | 1.75 in |
| Series | H Series |
| Rotation | Standard Rotation |
| Port Size & Location | 1/2 in NPTF Side |
| Special Features | None |
| Weight | 14.0 LB |
