Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| RPM [Min] | 192 rpm |
| Output Torque at Rated PSI (inch/pounds) | 3110 in lb |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Rotation | Standard Rotation |
| Mounting Hole Size | 3/8 in |
| Pressure [Max] | 1350 psi |
| Port Size | 1/2, 1/2-14 |
| Flange Orientation | Standard |
| Case Drain Code | 0 |
| Mount Type | 4 Bolt |
| Displacement (in³/rev) | 17.9 |
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Max] | 192 rpm |
| Corrosion Resistant | No |
| Pilot Diameter | 1.75 in |
| Port Type | NPTF |
| Motor Type | Spool Valve |
| Case Drain | None |
| Motor Element | Gerotor |
| Mounting Type Code | B |
| Material | Cast Iron |
| Flow Rate | 57 lpm |
| Special Features Hardware Code | 00 |
| Output Shaft Code | 02 |
| Seal Material | Buna-N |
| Special Features | None |
| Series | H Series |
| Special Features Assembly Code | 0 |
| Port Size & Location | 1/2 in NPTF Side |
| Bolt Circle Dia. | 3 1/4 in |
| Mounting Holes | 3/8-16 |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Code | B |
| Paint Code | A |
| Duty | Standard-Duty |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 6 |
| Shaft Type | Splined |
| Flow [Max] | 15 gal/min |
| Weight | 14.0 LB |
