Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 11.29 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Motor Type | Spool Valve |
| Pilot Diameter | 1.75 in |
| Special Features Assembly Code | 0 |
| RPM [Max] | 304 rpm |
| Port Size | 1/2 |
| Output Shaft Code | 02 |
| Flow [Max] | 15 gal/min |
| Mount Type | 4 Bolt |
| Output Torque at Rated PSI (inch/pounds) | 2343 in lb |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Special Features Hardware Code | 00 |
| Rotation | Standard Rotation |
| Case Drain | None |
| Displacement (in³/rev) | 11.29 |
| Splines | 6 |
| Mounting Type Code | B |
| Special Features | None |
| Shaft Type | Splined |
| Pressure [Max] | 1600 psi |
| Mounting Holes | 3/8-16 |
| Port Type | NPTF |
| Port Location | Side Port |
| Motor Element | Gerotor |
| Paint Code | A |
| Bolt Circle Dia. | 3 1/4 in |
| Case Drain Code | 0 |
| Flow Rate | 57 lpm |
| Series | H Series |
| Seal Material | Buna-N |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Size & Type | 1 in - 6T Spline |
| Corrosion Resistant | No |
| Duty | Standard-Duty |
| Material | Cast Iron |
| Mounting Hole Size | 3/8 in |
| Port Code | B |
| Port Size & Location | 1/2 in NPTF Side |
| Flange Orientation | Standard |
| RPM [Min] | 304 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Weight | 12.8 LB |
