- Spool Motor
- Gerotor
- Spool Valve
- Port
- 11.29 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Motor Element | Gerotor |
| Mounting Holes | 3/8-16 |
| Flow Rate | 57 lpm |
| Port Size | 1/2 |
| Material | Cast Iron |
| Port Code | B |
| Port Location | Side Port |
| Output Torque at Rated PSI (inch/pounds) | 2343 in lb |
| Output Shaft Code | 02 |
| RPM [Max] | 304 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Port Type | NPTF |
| Mounting Type Code | B |
| Mounting Hole Size | 3/8 in |
| Motor Type | Spool Valve |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow [Max] | 15 gal/min |
| Shaft Type | Splined |
| Corrosion Resistant | No |
| Bolt Circle Dia. | 3 1/4 in |
| Splines | 6 |
| Series | H Series |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| RPM [Min] | 304 rpm |
| Shaft Size & Type | 1 in - 6T Spline |
| Paint Code | A |
| Port Size & Location | 1/2 in NPTF Side |
| Special Features | None |
| Duty | Standard-Duty |
| Special Features Hardware Code | 00 |
| Mount Type | 4 Bolt |
| Case Drain Code | 0 |
| Special Features Assembly Code | 0 |
| Rotation | Standard Rotation |
| Pressure [Max] | 1600 psi |
| Case Drain | None |
| Displacement (in³/rev) | 11.29 |
| Pilot Diameter | 1.75 in |
| Flange Orientation | Standard |
| Seal Material | Buna-N |
| Weight | 12.8 LB |

