Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Mount Type | 4 Bolt |
| Rotation | Standard Rotation |
| Special Features Hardware Code | 00 |
| Series | H Series |
| Port Size | 1/2, 1/2-14 |
| Seal Material | Buna-N |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 0 |
| Duty | Standard-Duty |
| RPM [Max] | 585 rpm |
| RPM [Min] | 585 rpm |
| Displacement (in³/rev) | 5.9 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Holes | 3/8-16 |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Special Features | None |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Type | NPTF |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Splines | 6 |
| Shaft Type | Splined |
| Output Shaft Code | 02 |
| Flow [Max] | 15 gal/min |
| Mounting Type Code | B |
| Flange Orientation | Standard |
| Port Code | B |
| Port Location | Side Port |
| Motor Element | Gerotor |
| Motor Type | Spool Valve |
| Case Drain | None |
| Pilot Diameter | 1.75 in |
| Paint Code | A |
| Special Features Assembly Code | 0 |
| Bolt Circle Dia. | 3 1/4 in |
| Material | Cast Iron |
| Port Size & Location | 1/2 in NPTF Side |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 15 gal/min |
| Mounting Hole Size | 3/8 in |
| Weight | 11.8 LB |
