Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 5.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Bolt Circle Dia. | 3 1/4 in |
| Splines | 6 |
| Motor Element | Gerotor |
| Corrosion Resistant | No |
| Port Type | NPTF |
| Paint Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Series | H Series |
| Port Size | 1/2, 1/2-14 |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Special Features Hardware Code | 00 |
| Special Features | None |
| Mounting Holes | 3/8-16 |
| Output Torque at Rated PSI (inch/pounds) | 1368 in lb |
| Duty | Standard-Duty |
| Mount Type | 4 Bolt |
| Output Shaft Code | 02 |
| Port Code | B |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 0 |
| Displacement (in³/rev) | 5.9 |
| Pilot Diameter | 1.75 in |
| Mounting Hole Size | 3/8 in |
| Shaft Size & Type | 1 in - 6T Spline |
| Pressure [Max] | 1800 psi |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Material | Cast Iron |
| Mounting Type Code | B |
| Flange Orientation | Standard |
| Special Features Assembly Code | 0 |
| Flow Rate | 15 gal/min |
| RPM [Max] | 585 rpm |
| Port Location | Side Port |
| Shaft Type | Splined |
| Case Drain | None |
| Rotation | Standard Rotation |
| RPM [Min] | 585 rpm |
| Flow [Max] | 15 gal/min |
| Port Size & Location | 1/2 in NPTF Side |
| Weight | 11.8 LB |
