Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Seal Material | Buna-N |
| Special Features Assembly Code | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Duty | Standard-Duty |
| Splines | 6 |
| Case Drain | None |
| Flange Orientation | Standard |
| Mount Type | 4 Bolt |
| Port Type | NPTF |
| Rotation | Standard Rotation |
| Series | H Series |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Mounting Type Code | B |
| Mounting Holes | 3/8-16 |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| RPM [Max] | 760 rpm |
| Material | Cast Iron |
| Shaft Type | Splined |
| Motor Type | Spool Valve |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Pilot Diameter | 1.75 in |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 0 |
| Paint Code | A |
| Port Size | 1/2, 1/2-14 |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features Hardware Code | 00 |
| Port Size & Location | 1/2 in NPTF Side |
| Output Shaft Code | 02 |
| Mounting Hole Size | 3/8 in |
| Shaft Size & Type | 1 in - 6T Spline |
| Flow Rate | 15 gal/min |
| Displacement (in³/rev) | 4.5 |
| Port Code | B |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Weight | 11.5 LB |
