Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Mounting Type Code | B |
| Port Type | NPTF |
| Special Features | None |
| Shaft Size & Type | 1 in - 6T Spline |
| Bolt Circle Dia. | 3 1/4 in |
| Case Drain | None |
| RPM [Max] | 760 rpm |
| Mount Type | 4 Bolt |
| Special Features Assembly Code | 0 |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Splines | 6 |
| Special Features Hardware Code | 00 |
| Material | Cast Iron |
| Port Code | B |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Paint Code | A |
| Seal Material | Buna-N |
| Output Shaft Code | 02 |
| Duty | Standard-Duty |
| Shaft Type | Splined |
| Displacement (in³/rev) | 4.5 |
| Pressure [Max] | 1800 psi |
| Pilot Diameter | 1.75 in |
| Motor Type | Spool Valve |
| Mounting Hole Size | 3/8 in |
| Series | H Series |
| Port Size | 1/2, 1/2-14 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 0 |
| Flow [Max] | 15 gal/min |
| Port Size & Location | 1/2 in NPTF Side |
| Motor Element | Gerotor |
| Rotation | Standard Rotation |
| Mounting Holes | 3/8-16 |
| Flange Orientation | Standard |
| Port Location | Side Port |
| Corrosion Resistant | No |
| Flow Rate | 15 gal/min |
| Weight | 11.5 LB |
