Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Special Features Hardware Code | 00 |
| Port Type | Manifold |
| Mounting Holes | 3/8-16 |
| Bolt Circle Dia. | 3 1/4 in |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Paint Code | A |
| Output Shaft Code | 01 |
| Corrosion Resistant | No |
| Duty | Standard-Duty |
| Series | H Series |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Type | Straight w/ Woodruff Key |
| Displacement (in³/rev) | 14.1 |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Pressure [Max] | 1450 psi |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Max] | 243 rpm |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Pilot Diameter | 1.75 in |
| Special Features | None |
| Mount Type | 4 Bolt |
| Mounting Hole Size | 3/8 in |
| Case Drain | None |
| Special Features Assembly Code | 0 |
| Rotation | Standard Rotation |
| Flow Rate | 15 gal/min |
| Splines | 0 |
| Case Drain Code | 0 |
| Mounting Type Code | B |
| Port Code | C |
| Weight | 13.3 LB |
