Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 14.1 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Shaft Type | Straight w/ Woodruff Key |
| Rotation | Standard Rotation |
| Pilot Diameter | 1.75 in |
| Flow Rate | 15 gal/min |
| RPM [Max] | 243 rpm |
| Mounting Type Code | B |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Mounting Hole Size | 3/8 in |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Case Drain Code | 0 |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Series | H Series |
| Splines | 0 |
| Port Type | Manifold |
| Mount Type | 4 Bolt |
| Case Drain | None |
| Port Location | Side Port |
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Bolt Circle Dia. | 3 1/4 in |
| Corrosion Resistant | No |
| Mounting Holes | 3/8-16 |
| Flow [Max] | 15 gal/min |
| Displacement (in³/rev) | 14.1 |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Special Features | None |
| Paint Code | A |
| Port Code | C |
| Special Features Hardware Code | 00 |
| Output Shaft Code | 01 |
| Flange Orientation | Standard |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pressure [Max] | 1450 psi |
| Weight | 13.3 LB |
