SSF2S-120S

Intermediate Duty 2-Bolt Flange Unit

Item #100736641

1.25 in Inside Diameter

+ Show More

Auto Replenish

each One-time purchase

Product Details

Stamped steel housing with bearing insert
Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
Single lip contact seal

Specifications

Overall Height to Inner Ring	1.16 in
Duty Series	Intermediate
Radial Static Load Capacity (lb)	2567
Retainer Material	Molded Fiber Glass Reinforced Nylon
Inner Race Length (in)	1.1563
Expansion	No
Outer Ring Land Profile	Standard
Overall Width (in)	3.3125
Bore Shape	Straight
Length Through Bore	1.16 in
Measure Units	Inch
Foot Height (in)	0.203
Overall Length (in)	4.438
Internal Clearance	Standard
Housing Construction	Two Piece
Inch/Metric	Inch
Heat Treat Method (Inner Race)	Zone-Hardened
Mounted Unit Duty	Intermediate
Finish	Uncoated
Overall Width	3.31 in
Housing Width	3.31 in
Lubrication	Lithium Complex NLGI 2 Grease
Inner Race Heat Treat Method	Zone-Hardened
Inner Ring OD (in)	1.594
Bore Type	Straight
End Cap	No
Insert Material	52100 Bearing Steel
Maximum Operating Temperature	200
Overall Height (in)	1.1563
Bolt Size (in)	.3750
RPM [Max]	3000 rpm
Housing Width (in)	3.3125
I.D.	1.25 in
Retainer Type	Ball Riding Retainer
Bolt Center-to-Center Length (in)	3.5630
Bolt Size	0.38 in
Bore Size - Inch	1.25
Centerline to Front Face (in)	0.781
Relubricatable	Yes
Foot Height	0.2 in
Pilot Configuration	No Pilot
Seal Type	Single Lip Contact Seal
Radial Dynamic Load Capacity (lb)	4381
Radial Dynamic Load Capacity	4381 lb
Bearing Insert Coating	Uncoated
Radial Static Load Capacity	2567 lb
Replaceable Insert	Yes
Housing Material	Stamped Steel
Flange Type	2-Bolt Flange
Overall Height to Inner Ring (in)	1.156
Insert No.	LS-120S
Misalignment Type	Static Only
Length Through Bore (in)	1.1563
Weight	1.0 LB
EAN or UPC	662460337012