SSF2S-120S

Intermediate Duty 2-Bolt Flange Unit

Item #100736641

1.25 in Inside Diameter

+ Show More

Auto Replenish

each One-time purchase

Product Details

Stamped steel housing with bearing insert
Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
Single lip contact seal

Specifications

Mounted Unit Duty	Intermediate
Bearing Insert Coating	Uncoated
Measure Units	Inch
RPM [Max]	3000 rpm
Centerline to Front Face (in)	0.781
Bolt Size	0.38 in
Housing Construction	Two Piece
Flange Type	2-Bolt Flange
Housing Material	Stamped Steel
Insert Material	52100 Bearing Steel
Inner Race Heat Treat Method	Zone-Hardened
I.D.	1.25 in
Insert No.	LS-120S
Radial Static Load Capacity	2567 lb
End Cap	No
Radial Dynamic Load Capacity (lb)	4381
Retainer Type	Ball Riding Retainer
Bolt Center-to-Center Length (in)	3.5630
Duty Series	Intermediate
Inch/Metric	Inch
Finish	Uncoated
Radial Static Load Capacity (lb)	2567
Relubricatable	Yes
Bolt Size (in)	.3750
Outer Ring Land Profile	Standard
Bore Size - Inch	1.25
Housing Width	3.31 in
Radial Dynamic Load Capacity	4381 lb
Heat Treat Method (Inner Race)	Zone-Hardened
Pilot Configuration	No Pilot
Overall Width (in)	3.3125
Overall Height to Inner Ring (in)	1.156
Inner Race Length (in)	1.1563
Maximum Operating Temperature	200
Length Through Bore (in)	1.1563
Lubrication	Lithium Complex NLGI 2 Grease
Seal Type	Single Lip Contact Seal
Internal Clearance	Standard
Length Through Bore	1.16 in
Foot Height (in)	0.203
Expansion	No
Foot Height	0.2 in
Inner Ring OD (in)	1.594
Bore Type	Straight
Overall Height to Inner Ring	1.16 in
Retainer Material	Molded Fiber Glass Reinforced Nylon
Misalignment Type	Static Only
Overall Height (in)	1.1563
Bore Shape	Straight
Replaceable Insert	Yes
Overall Length (in)	4.438
Housing Width (in)	3.3125
Overall Width	3.31 in
Weight	1.0 LB
EAN or UPC	662460337012