SSF2S-119

Intermediate Duty 2-Bolt Flange Unit

Item #100936377

1.19 in Inside Diameter

+ Show More

Auto Replenish

each One-time purchase

Product Details

Stamped steel housing with bearing insert
Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
Single lip contact seal

Specifications

RPM [Max]	3000 rpm
Insert Material	52100 Bearing Steel
Radial Dynamic Load Capacity	4381 lb
Bearing Insert Coating	Uncoated
Bore Shape	Straight
Flange Type	2-Bolt Flange
Replaceable Insert	Yes
Bolt Size	0.38 in
Maximum Operating Temperature	200
Duty Series	Intermediate
Seal Type	Single Lip Contact Seal
Lubrication	Lithium Complex NLGI 2 Grease
Housing Material	Stamped Steel
Outer Ring Land Profile	Standard
Length Through Bore (in)	1.1563
Finish	Uncoated
Retainer Type	Ball Riding Retainer
Overall Height (in)	1.1563
Bolt Center-to-Center Length (in)	3.5625
Length Through Bore	1.16 in
Measure Units	Inch
Housing Construction	Two Piece
Overall Width (in)	3.3125
Overall Width	3.31 in
Mounted Unit Duty	Intermediate
Relubricatable	Yes
Radial Static Load Capacity	2567 lb
Expansion	No
Inner Ring OD (in)	1.594
Inner Race Length (in)	1.1563
Overall Height to Inner Ring (in)	1.156
Overall Length (in)	4.438
Inch/Metric	Inch
Internal Clearance	Standard
Bolt Size (in)	0.3750
Foot Height (in)	0.203
Insert No.	LS-119
Heat Treat Method (Inner Race)	Zone-Hardened
Bore Size - Inch	1.188
Radial Dynamic Load Capacity (lb)	4381
Overall Height to Inner Ring	1.16 in
Bore Type	Straight
Retainer Material	Molded Fiber Glass Reinforced Nylon
Misalignment Type	Static Only
Housing Width (in)	3.3125
Inner Race Heat Treat Method	Zone-Hardened
Pilot Configuration	No Pilot
Radial Static Load Capacity (lb)	2567
Housing Width	3.31 in
Centerline to Front Face (in)	0.781
I.D.	1.19 in
Foot Height	0.2 in
End Cap	No
Weight	1.04 LB
EAN or UPC	662460337005