SSF2S-119

Intermediate Duty 2-Bolt Flange Unit

Item #100936377

1.19 in Inside Diameter

+ Show More

Auto Replenish

each One-time purchase

Product Details

Stamped steel housing with bearing insert
Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
Single lip contact seal

Specifications

Flange Type	2-Bolt Flange
Seal Type	Single Lip Contact Seal
Bearing Insert Coating	Uncoated
Pilot Configuration	No Pilot
End Cap	No
Radial Static Load Capacity	2567 lb
Bolt Size	0.38 in
Insert Material	52100 Bearing Steel
Radial Dynamic Load Capacity	4381 lb
Lubrication	Lithium Complex NLGI 2 Grease
Outer Ring Land Profile	Standard
Bolt Center-to-Center Length (in)	3.5625
Overall Height to Inner Ring	1.16 in
Overall Width	3.31 in
Bore Type	Straight
Inner Race Heat Treat Method	Zone-Hardened
Inner Race Length (in)	1.1563
Relubricatable	Yes
Insert No.	LS-119
Overall Height to Inner Ring (in)	1.156
Retainer Type	Ball Riding Retainer
Overall Length (in)	4.438
Bore Shape	Straight
Centerline to Front Face (in)	0.781
Foot Height	0.2 in
Length Through Bore (in)	1.1563
Housing Width	3.31 in
Housing Material	Stamped Steel
Housing Width (in)	3.3125
Radial Static Load Capacity (lb)	2567
Finish	Uncoated
Expansion	No
Radial Dynamic Load Capacity (lb)	4381
Inch/Metric	Inch
Bolt Size (in)	0.3750
Length Through Bore	1.16 in
Measure Units	Inch
Heat Treat Method (Inner Race)	Zone-Hardened
Bore Size - Inch	1.188
Overall Width (in)	3.3125
Internal Clearance	Standard
Inner Ring OD (in)	1.594
Overall Height (in)	1.1563
Maximum Operating Temperature	200
Duty Series	Intermediate
Foot Height (in)	0.203
Mounted Unit Duty	Intermediate
Retainer Material	Molded Fiber Glass Reinforced Nylon
Housing Construction	Two Piece
Replaceable Insert	Yes
RPM [Max]	3000 rpm
I.D.	1.19 in
Misalignment Type	Static Only
Weight	1.04 LB
EAN or UPC	662460337005