
- Single Row Angular Contact Bearing, 50 mm ID x 110 mm OD x 27 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7300-PJ and PJD Series bearings are used for very heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
O.D. | 4.33 in, 110 mm |
Precision Level | Standard (ABEC 1) |
Material | Bearing Steel |
icNumber | 7695806 |
Limiting Speed - Grease | 5800 rpm |
Cage Type | Metal |
Inner Ring Width | 1.06 in, 27 mm |
Series | 7300PJ |
Preload Level | Light |
Inch/Metric | Metric |
Seal Material | None |
I.D. | 1.97 in, 50 mm |
Static Load Rating [Max] | 11900 lbf |
Locking Device | No Locking Device |
Flush Ground | Yes |
Capacity | Standard Capacity |
No. in Set | Single Bearing |
Precision | Standard |
O.D. Type | Cylindrical |
Limiting Speed - Oil | 7500 rpm |
Snap Ring | No Snap Ring |
Temperature Range [Max] | 450 °F |
Internal Design | Universal Mounting |
Dynamic Load Rating | 74.1 kN |
Ball Material | Steel |
Width | 1.06 in, 27 mm |
Static Load Rating | 51 kN |
Outer Ring Width | 1.06 in, 27 mm |
Enclosure | Open |
Radial Internal Clearance Specification | Normal Clearance |
Cage Material | Brass |
Fillet Radius | 2 mm |
Rows of Balls | Single |
Bearing Type | Unmounted, Angular Contact |
Contact Angle | 40 Degree |
Radial Internal Clearance | Normal |
Seal Type | Unsealed |
Bore Type | Cylindrical |
Origin | Single Row Angular Contact |
Lubricant | Oil Preservative |
Weight | 2.67 LB |
EAN or UPC | 97741017602 |
