Find a Service Center
- Single Row Angular Contact Bearing, 50 mm ID x 110 mm OD x 27 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Greater Than Normal Clearance (C3), 40° Contact Angle
description
- The angular contact medium 7300WN series is dimensionally interchangeable with the radial 300 series.The features of the 7000WN series include a refined bore diameter. The 7300WN series can sustain heavier thrust and combined loads applications in which the thrust load is in one direction or,in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust is present in both directions or where axial displacement of the shaft must be restricted. For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Size 7303W have a 20° contact angle and a steel cage.Sizes 7304WN through 7318WN have a 40° contact angle and a one-piece, ball poloted, pressed brass cage. Larger sizes 7319WN through 7330WN have a 40° contact angle and a one-piece, outer-ring-piloted, high strength, machined bronze cage.Sizes 7306WN to 7318WN also available with a one-piece, high strength, machined bronze retainer (MBR).
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Cage Material | Brass/Bronze |
| O.D. Type | Straight |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance | C3 |
| icNumber | 7695806 |
| Inch/Metric | Metric Bore |
| Precision | Standard |
| Preload Level | None |
| O.D. | 110 mm |
| Dynamic Load Rating | 17300 lbf |
| Bore Type | Round Bore |
| Snap Ring | No Snap Ring |
| Seal Material | None |
| Static Load Rating [Max] | 10800 lbf |
| Cage Type | Metal |
| Origin | Single Row Angular Contact |
| Enclosure | Open |
| Bearing Type | Angular Contact |
| Inner Ring Width | 27 mm |
| No. in Set | Single Bearing |
| Material | Steel |
| Rows of Balls | Single |
| I.D. | 50 mm |
| Ball Material | Steel |
| Seal Type | Unsealed |
| Contact Angle | 40° |
| Locking Device | No Locking Device |
| Lubricant | Oil Preservative |
| Outer Ring Width | 27 mm |
| Capacity | Standard Capacity |
| Fillet Radius | 0.079 in |
| Internal Design | Universal Mounting |
| Weight | 1.11 KG |
| EAN or UPC | 87796046924 |
