Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 1 3/4" Shaft
- 2 3/4" Centerline to Base
- 10 5/8" Base Length
- 8 7/16" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Conveyors
- Mechanical handling
- Electrical machinery
- Fans
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Shaft Dia. | 1.75 in |
| Base Length | 10 5/8 in |
| Base Width | 2 3/8 in |
| Housing Construction | 2 Piece |
| End Type | Open End |
| Bolt Hole Spacing | 8 7/16 in |
| Bolt Hole Spacing Range [Min] | 8 in |
| Bolt Hole Spacing Range [Max] | 8 7/8 in |
| Temperature Range [Min] | 32 °F |
| Temperature Range [Max] | 212 °F |
| Bolt Holes | 2 |
| Pedestal | P 02 |
| Inch/Metric | Inch |
| Axial Load | 810 lbf |
| Housing Height | 6 1/4 in |
| Static Load Rating [Max] | 18000 lbf |
| Pillow Block Type | Thru-Bolt |
| Lubrication | Relubricatable |
| Housing Material | Cast Iron |
| Dynamic Load Rating | 16800 lbf |
| RPM [Max] | 4630 rpm |
| Bearing Design | Expansion |
| Mounted Unit Duty | Heavy-Duty |
| Bearing Type | Split Cylindrical |
| Series | 01 Series |
| Seal Type | Triple Labyrinth Seals |
| Base Height | 1 in |
| Insert Type | Split Steel Insert |
| Bolt Size | 5/8 in |
| Locking Device | Clamping Ring Collar |
| Weight | 16.962 LB |
| EAN or UPC | 7316579385374 |
