Find a Service Center
- 3 3/4" Center Distance
- 1200:1 Ratio
- Shaft Input
- Left Output
- Universal, Parallel Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Torque Out @ 1750 rpm | 5700 in lb |
| Output (Shaft or Bore) Size | 1 5/8 in |
| Washdown Duty | No |
| Box Length | 8 1/2 in |
| Box Width | 14 35/64 in |
| Box Height | 10 7/16 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input Configuration | Shaft Input |
| Output RPM @ 1750 rpm Input | 1.46 rpm |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Bolt Centers w/ Vertical Base Kits (in) | 13.94 x 8.00 |
| Worm Position | Universal¦Parallel |
| Fan Cooled | No |
| Output Configuration | Left Output |
| Base to Shaft Center Height w/Low Vert. Base Kit | 5 1/4 in |
| Family Name | WA |
| Base to Shaft Center Height w/Std. Base Kit | 7 1/2 in |
| HP @ RPM | 0.3333333 hp @ 1800 rpm |
| Max. Thrust Load @ 1150 rpm | 1300 lb/in |
| Torque Out @ 1150 rpm | N/A |
| Frame | N/A |
| Bolt Centers w/ Std. Base Kit (in) | 10 3/8 x 7 |
| Max. Overhung Load @ 1750 rpm | 2000 lb/in |
| Bolt Center | 8 1/2 in x 4 3/4 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Lubrication | None |
| Base to Shaft Center Height w/High Vert. Base Kit | 7 in |
| Base to Centerline of Output Shaft | 6 9/16 in |
| Center Distance | 3 3/4 in |
| Housing Material | Cast Iron |
| Ratio | 1200:1 |
| Motor Application | General Purpose |
| Shaft Assembly Code | G |
| Frame Size | Shaft Input, Not a C-Face |
| Reduction Type | Double Reduction |
| Weight | 100.1 LB |
| EAN or UPC | 781711523292 |
