Find a Service Center
- 3 3/4" Center Distance
- 1200:1 Ratio
- Shaft Input
- Left Output
- Universal, Parallel Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Torque Out @ 1750 rpm | 5700 in lb |
| Output (Shaft or Bore) Size | 1 5/8 in |
| Output RPM @ 1750 rpm Input | 1.46 rpm |
| Frame Size | Shaft Input, Not a C-Face |
| Bolt Center | 8 1/2 in x 4 3/4 in |
| Base to Centerline of Output Shaft | 6 9/16 in |
| Box Length | 8 1/2 in |
| Washdown Duty | No |
| Center Distance | 3 3/4 in |
| Bolt Centers w/ Std. Base Kit (in) | 10 3/8 x 7 |
| Housing Material | Cast Iron |
| HP @ RPM | 0.3333333 hp @ 1800 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 7 in |
| Motor Application | General Purpose |
| Frame | N/A |
| Base to Shaft Center Height w/Std. Base Kit | 7 1/2 in |
| Output Configuration | Left Output |
| Ratio | 1200:1 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input (Shaft or Bore) Size | 5/8 in |
| Family Name | WA |
| Box Width | 14 35/64 in |
| Shaft Assembly Code | G |
| Torque Out @ 1150 rpm | N/A |
| Base to Shaft Center Height w/Low Vert. Base Kit | 5 1/4 in |
| Lubrication | None |
| Worm Position | Universal¦Parallel |
| Bolt Centers w/ Vertical Base Kits (in) | 13.94 x 8.00 |
| Reduction Type | Double Reduction |
| Box Height | 10 7/16 in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Max. Overhung Load @ 1750 rpm | 2000 lb/in |
| Max. Thrust Load @ 1150 rpm | 1300 lb/in |
| Fan Cooled | No |
| Input Configuration | Shaft Input |
| Weight | 100.1 LB |
| EAN or UPC | 781711523292 |
