RFWC760-150E-B9-G

700 Series C-Face Coupled Double Reduction Right Angle Reducer

Item #101871432

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Base to Centerline of Output Shaft	6 1/2 in
Worm Position	Universal¦Right Angle
Base to Shaft Center Height w/High Vert. Base Kit	9.63 in
HP @ RPM	5 hp @ 1800 rpm
Box Length	10 7/8 in
Shaft Assembly Code	G
Motor Application	General Purpose
Output (Shaft or Bore) Size	2 1/4 in
Torque Out @ 1750 rpm	17000 in lb
Center Distance	6 in
Frame Size	180TC, 210C
Lubrication	None
Frame	180TC, 210C
Fan Cooled	No
Max. Overhung Load @ 1750 rpm	2400 lb/in
Base to Centerline of Input Shaft	N/A
Box Width	19 1/8 in
Motor HP	5 hp
Bolt Centers w/ Std. Base Kit (in)	16 1/2 x 9 1/2
Reduction Type	Double Reduction
Base to Shaft Center Height w/Low Vert. Base Kit	7.31 in
Bore Code	B9
Ratio	150:1
Box Height	16 1/2 in
Output Configuration	Left Output
Torque Out @ 1150 rpm	N/A
Family Name	RFWC
Bolt Centers w/ Vertical Base Kits (in)	20.88 x 11.75
Input (Shaft or Bore) Size	1 1/8 in
Housing Material	Cast Iron
Max. Thrust Load @ 1150 rpm	2100 lb/in
Washdown Duty	No
Output RPM @ 1750 rpm Input	11.67 rpm
Base to Shaft Center Height w/Std. Base Kit	7 3/4 in
Input Configuration	C-Face Coupled
Keyway Size	1/4 x 1/8
Thermal Input Horsepower @ 1750 RPM	N/A
Bolt Center	12 3/4" x 6 3/8"
Weight	341.1 LB
EAN or UPC	781711531471