RFWC760-150E-B9-G

700 Series C-Face Coupled Double Reduction Right Angle Reducer

Item #101871432

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Motor Application	General Purpose
Input Configuration	C-Face Coupled
Fan Cooled	No
Lubrication	None
Base to Shaft Center Height w/High Vert. Base Kit	9.63 in
Washdown Duty	No
Frame Size	180TC, 210C
Keyway Size	1/4 x 1/8
Max. Thrust Load @ 1150 rpm	2100 lb/in
Thermal Input Horsepower @ 1750 RPM	N/A
Bolt Centers w/ Std. Base Kit (in)	16 1/2 x 9 1/2
Output (Shaft or Bore) Size	2 1/4 in
Bolt Center	12 3/4" x 6 3/8"
Base to Centerline of Output Shaft	6 1/2 in
Torque Out @ 1150 rpm	N/A
Output RPM @ 1750 rpm Input	11.67 rpm
Motor HP	5 hp
Torque Out @ 1750 rpm	17000 in lb
Bore Code	B9
HP @ RPM	5 hp @ 1800 rpm
Input (Shaft or Bore) Size	1 1/8 in
Output Configuration	Left Output
Frame	180TC, 210C
Housing Material	Cast Iron
Base to Shaft Center Height w/Std. Base Kit	7 3/4 in
Box Width	19 1/8 in
Box Length	10 7/8 in
Base to Shaft Center Height w/Low Vert. Base Kit	7.31 in
Reduction Type	Double Reduction
Base to Centerline of Input Shaft	N/A
Shaft Assembly Code	G
Max. Overhung Load @ 1750 rpm	2400 lb/in
Bolt Centers w/ Vertical Base Kits (in)	20.88 x 11.75
Center Distance	6 in
Box Height	16 1/2 in
Ratio	150:1
Worm Position	Universal¦Right Angle
Family Name	RFWC
Weight	341.1 LB
EAN or UPC	781711531471