RFWA738-400E-B5-G

700 Series C-Face Coupled Double Reduction Parallel Reducer

Item #101871343

Universal, Parallel Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Torque Out @ 1750 rpm	5700 in lb
Bore Code	B5
Center Distance	3 3/4 in
Family Name	RFWA
Motor HP	3/4 hp
Output Configuration	Left Output
Max. Overhung Load @ 1750 rpm	2000 lb/in
Lubrication	None
Box Height	10 7/16 in
Base to Shaft Center Height w/Low Vert. Base Kit	5 1/4 in
Input Configuration	C-Face Coupled
Base to Centerline of Input Shaft	4 7/8 in
Base to Shaft Center Height w/High Vert. Base Kit	7 in
Fan Cooled	No
HP @ RPM	0.75 hp @ 1800 rpm
Torque Out @ 1150 rpm	N/A
Output (Shaft or Bore) Size	1 5/8 in
Box Width	14 35/64 in
Shaft Assembly Code	G
Base to Centerline of Output Shaft	6 9/16 in
Housing Material	Cast Iron
Keyway Size	3/16 x 3/32
Motor Application	General Purpose
Box Length	8 1/2 in
Worm Position	Universal¦Parallel
Frame	56C
Reduction Type	Double Reduction
Bolt Center	8 1/2 in x 4 3/4 in
Frame Size	56C
Input (Shaft or Bore) Size	5/8 in
Max. Thrust Load @ 1150 rpm	1300 lb/in
Bolt Centers w/ Vertical Base Kits (in)	13.94 x 8.00
Bolt Centers w/ Std. Base Kit (in)	10 3/8 x 7
Thermal Input Horsepower @ 1750 RPM	N/A
Ratio	400:1
Output RPM @ 1750 rpm Input	4.38 rpm
Base to Shaft Center Height w/Std. Base Kit	7 1/2 in
Washdown Duty	No
Weight	115.1 LB
EAN or UPC	781711530627