RFWA738-400E-B5-G

700 Series C-Face Coupled Double Reduction Parallel Reducer

Item #101871343

Universal, Parallel Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Motor Application	General Purpose
Base to Shaft Center Height w/Low Vert. Base Kit	5 1/4 in
Frame	56C
Output RPM @ 1750 rpm Input	4.38 rpm
Frame Size	56C
Thermal Input Horsepower @ 1750 RPM	N/A
Shaft Assembly Code	G
Box Width	14 35/64 in
Housing Material	Cast Iron
Output Configuration	Left Output
Input (Shaft or Bore) Size	5/8 in
Washdown Duty	No
Family Name	RFWA
Bolt Centers w/ Std. Base Kit (in)	10 3/8 x 7
Reduction Type	Double Reduction
Ratio	400:1
Box Length	8 1/2 in
Worm Position	Universal¦Parallel
Torque Out @ 1150 rpm	N/A
Base to Centerline of Output Shaft	6 9/16 in
HP @ RPM	0.75 hp @ 1800 rpm
Base to Shaft Center Height w/Std. Base Kit	7 1/2 in
Bolt Centers w/ Vertical Base Kits (in)	13.94 x 8.00
Max. Thrust Load @ 1150 rpm	1300 lb/in
Fan Cooled	No
Output (Shaft or Bore) Size	1 5/8 in
Max. Overhung Load @ 1750 rpm	2000 lb/in
Center Distance	3 3/4 in
Input Configuration	C-Face Coupled
Base to Shaft Center Height w/High Vert. Base Kit	7 in
Lubrication	None
Bolt Center	8 1/2 in x 4 3/4 in
Keyway Size	3/16 x 3/32
Box Height	10 7/16 in
Base to Centerline of Input Shaft	4 7/8 in
Bore Code	B5
Torque Out @ 1750 rpm	5700 in lb
Motor HP	3/4 hp
Weight	115.1 LB
EAN or UPC	781711530627