RFWA726-100-B5-G

700 Series C-Face Coupled Double Reduction Parallel Reducer

Item #101871342

Universal, Parallel Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Motor Application	General Purpose
Frame	56C
Torque Out @ 1750 rpm	1785 in lb
Lubrication	None
Motor HP	3/4 hp
Max. Overhung Load @ 1750 rpm	1000 lb/in
Thermal Input Horsepower @ 1750 RPM	N/A
Bolt Centers w/ Vertical "J" Base Kit (in)	10.38 x 3.13
Output Configuration	Left Output
Bore Code	B5
Frame Size	56C
Bolt Centers w/ Vertical Base Kits (in)	10.13 x 5.75
Base to Shaft Center Height w/Vert. "J" Base Kit	4.75 in
Output (Shaft or Bore) Size	1 1/8 in
Base to Shaft Center Height w/Std. Base Kit	5.81 in
HP @ RPM	0.75 hp @ 1800 rpm
Input (Shaft or Bore) Size	5/8 in
Torque Out @ 1150 rpm	N/A
Housing Material	Cast Iron
Ratio	100:1
Center Distance	2 5/8 in
Max. Thrust Load @ 1150 rpm	900 lb/in
Reduction Type	Double Reduction
Box Length	11 21/32 in
Keyway Size	3/16 x 3/32
Family Name	RFWA
Box Width	6 in
Input Configuration	C-Face Coupled
Bolt Center	6 3/8 in x 3 3/8 in
Washdown Duty	No
Base to Centerline of Input Shaft	3 25/32 in
Output RPM @ 1750 rpm Input	17.5 rpm
Worm Position	Universal¦Parallel
Fan Cooled	No
Box Height	8 in
Base to Shaft Center Height w/High Vert. Base Kit	5.59 in
Base to Centerline of Output Shaft	5 1/16 in
Shaft Assembly Code	G
Base to Shaft Center Height w/Low Vert. Base Kit	3.63 in
Bolt Centers w/ Std. Base Kit (in)	8 x 5 1/4
Weight	63.1 LB
EAN or UPC	781711530405