RFWA726-100-B5-G

700 Series C-Face Coupled Double Reduction Parallel Reducer

Item #101871342

Universal, Parallel Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Output Configuration	Left Output
Motor HP	3/4 hp
Frame	56C
Box Width	6 in
Thermal Input Horsepower @ 1750 RPM	N/A
Lubrication	None
Base to Centerline of Output Shaft	5 1/16 in
Base to Shaft Center Height w/Low Vert. Base Kit	3.63 in
Shaft Assembly Code	G
Housing Material	Cast Iron
Input Configuration	C-Face Coupled
Bolt Centers w/ Vertical "J" Base Kit (in)	10.38 x 3.13
Bolt Center	6 3/8 in x 3 3/8 in
Base to Shaft Center Height w/High Vert. Base Kit	5.59 in
Base to Centerline of Input Shaft	3 25/32 in
Max. Overhung Load @ 1750 rpm	1000 lb/in
Input (Shaft or Bore) Size	5/8 in
Reduction Type	Double Reduction
Frame Size	56C
Torque Out @ 1750 rpm	1785 in lb
Max. Thrust Load @ 1150 rpm	900 lb/in
Bolt Centers w/ Std. Base Kit (in)	8 x 5 1/4
Output RPM @ 1750 rpm Input	17.5 rpm
HP @ RPM	0.75 hp @ 1800 rpm
Fan Cooled	No
Torque Out @ 1150 rpm	N/A
Base to Shaft Center Height w/Vert. "J" Base Kit	4.75 in
Family Name	RFWA
Output (Shaft or Bore) Size	1 1/8 in
Box Height	8 in
Base to Shaft Center Height w/Std. Base Kit	5.81 in
Worm Position	Universal¦Parallel
Bore Code	B5
Box Length	11 21/32 in
Ratio	100:1
Center Distance	2 5/8 in
Keyway Size	3/16 x 3/32
Motor Application	General Purpose
Washdown Duty	No
Bolt Centers w/ Vertical Base Kits (in)	10.13 x 5.75
Weight	63.1 LB
EAN or UPC	781711530405