Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life
caution
Ideal for use with filters and lubricators
Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
Some chemicals can cause damage
Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
Output Configuration
Left Output
Box Height
6 25/64 in
Bolt Centers w/ Std. Base Kit (in)
6 3/8 x 4 11/16
Bolt Centers w/ Vertical Base Kits (in)
8 3/8 x 4 7/8
Reduction Type
Double Reduction
Output RPM @ 1750 rpm Input
0.97 rpm
Box Width
9 55/64 in
Torque Out @ 1150 rpm
N/A
Bolt Centers w/ Vertical "J" Base Kit (in)
8.63 x 2.63
Bore Code
B5
Base to Centerline of Output Shaft
4 3/32 in
Max. Overhung Load @ 1750 rpm
700 lb/in
Keyway Size
3/16 x 3/32
Bolt Center
5 in x 2 7/8 in
Center Distance
2.0625 in
Thermal Input Horsepower @ 1750 RPM
N/A
Max. Thrust Load @ 1150 rpm
700 lb/in
Base to Shaft Center Height w/High Vert. Base Kit
4.88 in
Input Configuration
C-Face Quilled
Worm Position
Universal¦Parallel
Base to Shaft Center Height w/Vert. "J" Base Kit
3.94 in
Input (Shaft or Bore) Size
5/8 in
Motor HP
0.17 hp
Family Name
FWA
Frame
56C
Shaft Assembly Code
G
Frame Size
56C
Base to Shaft Center Height w/Std. Base Kit
4.81 in
Lubrication
None
Housing Material
Cast Iron
Output (Shaft or Bore) Size
1 in
Torque Out @ 1750 rpm
900 in lb
Base to Shaft Center Height w/Low Vert. Base Kit
3.13 in
HP @ RPM
0.08333333 hp @ 1800 rpm
Motor Application
General Purpose
Base to Centerline of Input Shaft
3 3/8 in
Washdown Duty
No
Fan Cooled
No
Ratio
1800:1
Box Length
5 13/64 in
Weight
35.1 LB
EAN or UPC
884107007434
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
