Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life
caution
Ideal for use with filters and lubricators
Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
Some chemicals can cause damage
Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
Family Name
FWA
Output RPM @ 1750 rpm Input
0.97 rpm
Torque Out @ 1150 rpm
N/A
Input (Shaft or Bore) Size
5/8 in
Torque Out @ 1750 rpm
900 in lb
Housing Material
Cast Iron
Thermal Input Horsepower @ 1750 RPM
N/A
HP @ RPM
0.08333333 hp @ 1800 rpm
Reduction Type
Double Reduction
Bolt Center
5 in x 2 7/8 in
Base to Shaft Center Height w/Low Vert. Base Kit
3.13 in
Frame Size
56C
Frame
56C
Motor Application
General Purpose
Bolt Centers w/ Vertical Base Kits (in)
8 3/8 x 4 7/8
Bolt Centers w/ Std. Base Kit (in)
6 3/8 x 4 11/16
Max. Overhung Load @ 1750 rpm
700 lb/in
Box Length
5 13/64 in
Bolt Centers w/ Vertical "J" Base Kit (in)
8.63 x 2.63
Center Distance
2.0625 in
Base to Shaft Center Height w/Vert. "J" Base Kit
3.94 in
Keyway Size
3/16 x 3/32
Output Configuration
Left Output
Base to Centerline of Output Shaft
4 3/32 in
Shaft Assembly Code
G
Fan Cooled
No
Worm Position
Universal¦Parallel
Base to Shaft Center Height w/High Vert. Base Kit
4.88 in
Washdown Duty
No
Motor HP
0.17 hp
Lubrication
None
Bore Code
B5
Max. Thrust Load @ 1150 rpm
700 lb/in
Ratio
1800:1
Box Height
6 25/64 in
Input Configuration
C-Face Quilled
Output (Shaft or Bore) Size
1 in
Base to Centerline of Input Shaft
3 3/8 in
Box Width
9 55/64 in
Base to Shaft Center Height w/Std. Base Kit
4.81 in
Weight
35.1 LB
EAN or UPC
884107007434
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
