Find a Service Center
- .94" Center Distance
- 15:1 Ratio
- Special Frame
- C-Face Quilled Input
- Left Output
features
- Prelubricated for ambient temperature range of 50 °F to 125 °F
caution
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
- Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
| Output RPM @ 1750 rpm Input | 117 rpm |
| Bolt Center | 2 3/4" x 2 3/4" |
| Input Configuration | C-Face Quilled |
| Base to Centerline of Output Shaft | 1 9/16 in |
| Frame | Special |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Overhung Load @ RPM | 25 lb/in @ 1150 rpm, 25 lb/in @ 1750 rpm |
| Reduction Type | Single Reduction |
| Motor Application | General Purpose |
| Frame Size | SP |
| Box Height | 3 19/32 in |
| Center Distance | 0.94 in |
| Torque Out @ 1750 rpm | 22 in lb |
| Lubrication | Mobil SHC634 Synthetic |
| Shaft Assembly Code | G |
| Ratio | 15:1 |
| Box Width | 3 1/2 in |
| Bolt Center Length x Bolt Center Width | 2 3/4 in x 4 3/4 in |
| Max. Overhung Load @ 1750 rpm | 25 lb/in |
| Input HP @ RPM | 0.06 hp @ 1750 rpm |
| Input (Shaft or Bore) Size | 1/2 in |
| Output Configuration | Left Output |
| Output Torque @ RPM | 22 in lb @ 1750 rpm |
| Base to Centerline of Input Shaft | N/A |
| Bore Code | SP |
| Torque Out @ 1150 rpm | N/A |
| Max. Thrust Load @ 1150 rpm | 25 lb/in |
| Box Length | 4 1/32 in |
| Washdown Duty | No |
| Worm Position | Top |
| Use With | 309 |
| Family Name | F |
| Installed Options | Low Horizontal Base |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Max. Thrust Load @ RPM | 25 lb/in @ 1150 rpm, 25 lb/in @ 1750 rpm |
| Housing Material | Cast Iron |
| Output (Shaft or Bore) Size | 1/2 in |
| Fan Cooled | No |
| Weight | 7.0 LB |
