Find a Service Center
- .94" Center Distance
- 15:1 Ratio
- Special Frame
- C-Face Quilled Input
- Left Output
features
- Prelubricated for ambient temperature range of 50 °F to 125 °F
caution
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
- Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
| Bolt Center Length x Bolt Center Width | 2 3/4 in x 4 3/4 in |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Base to Centerline of Input Shaft | N/A |
| Bolt Center | 2 3/4" x 2 3/4" |
| Motor Application | General Purpose |
| Center Distance | 0.94 in |
| Max. Overhung Load @ RPM | 25 lb/in @ 1150 rpm, 25 lb/in @ 1750 rpm |
| Torque Out @ 1150 rpm | N/A |
| Output (Shaft or Bore) Size | 1/2 in |
| Box Height | 3 19/32 in |
| Use With | 309 |
| Input (Shaft or Bore) Size | 1/2 in |
| Washdown Duty | No |
| Housing Material | Cast Iron |
| Ratio | 15:1 |
| Shaft Assembly Code | G |
| Fan Cooled | No |
| Base to Centerline of Output Shaft | 1 9/16 in |
| Reduction Type | Single Reduction |
| Max. Thrust Load @ RPM | 25 lb/in @ 1150 rpm, 25 lb/in @ 1750 rpm |
| Lubrication | Mobil SHC634 Synthetic |
| Bore Code | SP |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Frame | Special |
| Family Name | F |
| Frame Size | SP |
| Output Configuration | Left Output |
| Box Length | 4 1/32 in |
| Torque Out @ 1750 rpm | 22 in lb |
| Max. Overhung Load @ 1750 rpm | 25 lb/in |
| Input Configuration | C-Face Quilled |
| Box Width | 3 1/2 in |
| Worm Position | Top |
| Input HP @ RPM | 0.06 hp @ 1750 rpm |
| Output Torque @ RPM | 22 in lb @ 1750 rpm |
| Max. Thrust Load @ 1150 rpm | 25 lb/in |
| Installed Options | Low Horizontal Base |
| Weight | 7.0 LB |
