Find a Service Center
- 1.330" Center Distance
- 5:1 Ratio
- Shaft Input
- Right Output
- Universal Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Periodic inspection is required to determine if the unit is in proper working order by inspecting and replacing the urethane seal, inspecting to see if material buildup has occurred and ensuring proper adjustment and tightness of all adjustable bolts.
- The Guardian™ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Housing Material | Cast Iron |
| Washdown Duty | No |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Shaft Assembly Code | J |
| Output (Shaft or Bore) Size | 5/8 in |
| Torque Out @ 1150 rpm | 200 in lb |
| Ratio | 5:1 |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Box Height | 4 21/32 in |
| Motor Application | General Purpose |
| Fan Cooled | No |
| Input Configuration | Shaft Input |
| Frame | N/A |
| Box Length | 4 1/4 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Family Name | Std Unit |
| Output Configuration | Right Output |
| Output Torque @ RPM | 200 in lb @ 1150 rpm, 235 in lb @ 1750 rpm |
| Lubrication | None |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Box Width | 2 7/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Bolt Center | 4 3/8 in x 3 5/16 in |
| Base to Centerline of Output Shaft | 1 23/32 in |
| Reduction Type | Single Reduction |
| HP @ RPM | 1 hp @ 1800 rpm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Base to Centerline of Input Shaft | 3 3/64 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Use With | 713 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Max. Input HP @ 100 rpm | 0.091 hp |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Worm Position | Universal |
| Input (Shaft or Bore) Size | 1/2 in |
| Torque Out @ 1750 rpm | 235 in lb |
| Bolt Center Length x Bolt Center Width | 4 3/8 in x 3 5/16 in |
| Frame Size | Shaft Input, Not a C-Face |
| Center Distance | 1.33 in |
| Input HP @ RPM | 0.84 hp @ 1150 rpm, 1.39 hp @ 1750 rpm |
| Weight | 11.1 LB |
| EAN or UPC | 781711516089 |
