Find a Service Center
- 1.330" Center Distance
- 5:1 Ratio
- Shaft Input
- Right Output
- Universal Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Periodic inspection is required to determine if the unit is in proper working order by inspecting and replacing the urethane seal, inspecting to see if material buildup has occurred and ensuring proper adjustment and tightness of all adjustable bolts.
- The Guardian™ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.
| Thermal Input Horsepower @ 1750 RPM | N/A |
| HP @ RPM | 1 hp @ 1800 rpm |
| Max. Input HP @ 100 rpm | 0.091 hp |
| Housing Material | Cast Iron |
| Frame | N/A |
| Use With | 713 |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Box Height | 4 21/32 in |
| Box Length | 4 1/4 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Center Distance | 1.33 in |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Motor Application | General Purpose |
| Washdown Duty | No |
| Bolt Center Length x Bolt Center Width | 4 3/8 in x 3 5/16 in |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Bolt Center | 4 3/8 in x 3 5/16 in |
| Fan Cooled | No |
| Shaft Assembly Code | J |
| Reduction Type | Single Reduction |
| Family Name | Std Unit |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Box Width | 2 7/8 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Frame Size | Shaft Input, Not a C-Face |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Ratio | 5:1 |
| Output Configuration | Right Output |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Worm Position | Universal |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Lubrication | None |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Output (Shaft or Bore) Size | 5/8 in |
| Base to Centerline of Output Shaft | 1 23/32 in |
| Torque Out @ 1750 rpm | 235 in lb |
| Base to Centerline of Input Shaft | 3 3/64 in |
| Input HP @ RPM | 0.84 hp @ 1150 rpm, 1.39 hp @ 1750 rpm |
| Input Configuration | Shaft Input |
| Output Torque @ RPM | 200 in lb @ 1150 rpm, 235 in lb @ 1750 rpm |
| Torque Out @ 1150 rpm | 200 in lb |
| Input (Shaft or Bore) Size | 1/2 in |
| Weight | 11.1 LB |
| EAN or UPC | 781711516089 |
