Find a Service Center
- 1" Center Distance
- 30:1 Ratio
- Shaft Input
- Left & Right Output
- Universal Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Always follow lock out and tag out procedures when working on conveyor systems.
- Periodic inspection is required to determine if the unit is in proper working order by inspecting and replacing the urethane seal, inspecting to see if material buildup has occurred and ensuring proper adjustment and tightness of all adjustable bolts.
- The Guardian™ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.
| Family Name | Std Unit |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Center Distance | 1 in |
| Torque Out @ 1150 rpm | 133 in lb |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Height | 3 5/8 in |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Use With | 710 |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Input HP @ RPM | 0.1 hp @ 1150 rpm, 0.2 hp @ 1750 rpm |
| Reduction Type | Single Reduction |
| HP @ RPM | 0.08333333 hp @ 1200 rpm, 0.125 hp @ 1800 rpm |
| Lubrication | None |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Bolt Center | 3 3/4" x 2 7/8" |
| Output (Shaft or Bore) Size | 1/2 in |
| Worm Position | Universal |
| Output Torque @ RPM | 133 in lb @ 1150 rpm, 150 in lb @ 1750 rpm |
| Fan Cooled | No |
| Motor Application | General Purpose |
| Frame Size | Shaft Input, Not a C-Face |
| Washdown Duty | No |
| Bolt Center Length x Bolt Center Width | 3 3/4 in x 2 7/8 in |
| Max. Input HP @ 100 rpm | 0.013 hp |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Box Width | 2 1/2 in |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Ratio | 30:1 |
| Input Configuration | Shaft Input |
| Box Length | 3 1/4 in |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Base to Centerline of Output Shaft | 1 5/16 in |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Housing Material | Cast Iron |
| Shaft Assembly Code | H |
| Torque Out @ 1750 rpm | 150 in lb |
| Input (Shaft or Bore) Size | 3/8 in |
| Frame | N/A |
| Output Configuration | Left & Right Output |
| Weight | 6.1 LB |
| EAN or UPC | 781711515983 |
