Find a Service Center
- 1" Center Distance
- 30:1 Ratio
- Shaft Input
- Left & Right Output
- Universal Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Always follow lock out and tag out procedures when working on conveyor systems.
- Periodic inspection is required to determine if the unit is in proper working order by inspecting and replacing the urethane seal, inspecting to see if material buildup has occurred and ensuring proper adjustment and tightness of all adjustable bolts.
- The Guardian™ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.
| Frame Size | Shaft Input, Not a C-Face |
| Box Length | 3 1/4 in |
| Motor Application | General Purpose |
| Family Name | Std Unit |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Base to Centerline of Output Shaft | 1 5/16 in |
| Ratio | 30:1 |
| Output Torque @ RPM | 133 in lb @ 1150 rpm, 150 in lb @ 1750 rpm |
| Center Distance | 1 in |
| Use With | 710 |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Frame | N/A |
| Input HP @ RPM | 0.1 hp @ 1150 rpm, 0.2 hp @ 1750 rpm |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.013 hp |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Shaft Assembly Code | H |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Bolt Center | 3 3/4" x 2 7/8" |
| Lubrication | None |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Housing Material | Cast Iron |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| HP @ RPM | 0.08333333 hp @ 1200 rpm, 0.125 hp @ 1800 rpm |
| Washdown Duty | No |
| Box Height | 3 5/8 in |
| Output Configuration | Left & Right Output |
| Box Width | 2 1/2 in |
| Torque Out @ 1750 rpm | 150 in lb |
| Bolt Center Length x Bolt Center Width | 3 3/4 in x 2 7/8 in |
| Input (Shaft or Bore) Size | 3/8 in |
| Output (Shaft or Bore) Size | 1/2 in |
| Torque Out @ 1150 rpm | 133 in lb |
| Worm Position | Universal |
| Fan Cooled | No |
| Input Configuration | Shaft Input |
| Reduction Type | Single Reduction |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Weight | 6.1 LB |
| EAN or UPC | 781711515983 |
