Find a Service Center
- .94" Center Distance
- 20:1 Ratio
- Shaft Input
- Left Output
- Bottom Worm Position
features
- Prelubricated for ambient temperature range of 50 °F to 125 °F
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Shaft Assembly Code | J |
| Fan Cooled | No |
| Ratio | 20:1 |
| Max. Thrust Load @ 1150 rpm | 25 lb/in |
| Base to Centerline of Input Shaft | 1 9/16 in |
| Installed Options | Horizontal Base |
| Torque Out @ 1150 rpm | N/A |
| Input (Shaft or Bore) Size | 5/16 in |
| Output Torque @ RPM | 43 in lb @ 1750 rpm |
| Base to Centerline of Output Shaft | 2 1/2 in |
| HP @ RPM | 0.1666667 hp @ 1800 rpm |
| Box Height | 3 15/32 in |
| Housing Material | Cast Iron |
| Torque Out @ 1750 rpm | 43 in lb |
| Bolt Center | 2 3/4" x 2 3/4" |
| Worm Position | Bottom |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Length | 2 3/4 in |
| Bolt Center Length x Bolt Center Width | 2 3/4 in x 2 3/4 in |
| Box Width | 2 3/4 in |
| Max. Thrust Load @ RPM | 25 lb/in @ 1150 rpm, 25 lb/in @ 1750 rpm |
| Output Configuration | Left Output |
| Reduction Type | Single Reduction |
| Frame | N/A |
| Max. Overhung Load @ 1750 rpm | 25 lb/in |
| Input Configuration | Shaft Input |
| Family Name | Std Unit |
| Frame Size | Shaft Input, Not a C-Face |
| Output RPM @ Input RPM | 88 rpm @ 1750 rpm |
| Output (Shaft or Bore) Size | 1/2 in |
| Max. Overhung Load @ RPM | 25 lb/in @ 1150 rpm, 25 lb/in @ 1750 rpm |
| Input HP @ RPM | 0.17 hp @ 1750 rpm |
| Output RPM @ 1750 rpm Input | 87.5 rpm |
| Use With | 309 |
| Center Distance | 0.94 in |
| Lubrication | Mobil SHC634 Synthetic |
| Motor Application | General Purpose |
| Washdown Duty | No |
| Weight | 10.1 LB |
| EAN or UPC | 781711455210 |
