Find a Service Center
- .94" Center Distance
- 20:1 Ratio
- Shaft Input
- Left Output
- Bottom Worm Position
features
- Prelubricated for ambient temperature range of 50 °F to 125 °F
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Input HP @ RPM | 0.17 hp @ 1750 rpm |
| HP @ RPM | 0.1666667 hp @ 1800 rpm |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Box Length | 2 3/4 in |
| Bolt Center Length x Bolt Center Width | 2 3/4 in x 2 3/4 in |
| Family Name | Std Unit |
| Max. Thrust Load @ 1150 rpm | 25 lb/in |
| Max. Overhung Load @ 1750 rpm | 25 lb/in |
| Motor Application | General Purpose |
| Output RPM @ Input RPM | 88 rpm @ 1750 rpm |
| Frame | N/A |
| Fan Cooled | No |
| Torque Out @ 1750 rpm | 43 in lb |
| Input Configuration | Shaft Input |
| Worm Position | Bottom |
| Torque Out @ 1150 rpm | N/A |
| Input (Shaft or Bore) Size | 5/16 in |
| Housing Material | Cast Iron |
| Output (Shaft or Bore) Size | 1/2 in |
| Box Width | 2 3/4 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Torque @ RPM | 43 in lb @ 1750 rpm |
| Bolt Center | 2 3/4" x 2 3/4" |
| Max. Thrust Load @ RPM | 25 lb/in @ 1150 rpm, 25 lb/in @ 1750 rpm |
| Installed Options | Horizontal Base |
| Base to Centerline of Input Shaft | 1 9/16 in |
| Washdown Duty | No |
| Frame Size | Shaft Input, Not a C-Face |
| Output RPM @ 1750 rpm Input | 87.5 rpm |
| Lubrication | Mobil SHC634 Synthetic |
| Output Configuration | Left Output |
| Max. Overhung Load @ RPM | 25 lb/in @ 1150 rpm, 25 lb/in @ 1750 rpm |
| Shaft Assembly Code | J |
| Box Height | 3 15/32 in |
| Center Distance | 0.94 in |
| Use With | 309 |
| Reduction Type | Single Reduction |
| Ratio | 20:1 |
| Weight | 10.1 LB |
| EAN or UPC | 781711455210 |
