Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 24 Number of Teeth
- 3.766 in Outside Diameter
- H100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 3.7660 in |
| Bore Type | Reborable |
| Belt Pitch | 1/2 in |
| Bore Range [Min] | 3/4 in |
| Hub Type | B |
| Finished Bore | N/A |
| Type | DF-1 |
| Bushing Series | N/A |
| Hardened Teeth | With Hardened Teeth |
| Hub Dia. | 3 1/8 in |
| Bushing Type | None |
| Belt Size | H |
| Pitch Diameter | 3.820 in |
| Belt Width | 1 in |
| Bore Range [Max] | 2 1/8 in |
| Material | Steel |
| No. of Teeth | 24 |
| Length Through Bore | 2.312 in |
| Hub Projection | 1 in |
| Weight | 5.3 LB |
| EAN or UPC | 697950151502 |
