Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 20 Number of Teeth
- 1.253 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 20 |
| Hub Type | B |
| Set Screw Size | 8-32 x 1/8 |
| Belt Width | 1/4 in, 3/8 in |
| Pitch Diameter | 1.273 in |
| Hub Projection | 0.218 in |
| Belt Pitch | 0.200 in |
| Bushing Type | None |
| Bore Type | Bushed |
| Length Through Bore | 0.940 in |
| Belt Size | XL |
| Bore Range [Max] | 11/16 in |
| Bushing Series | N/A |
| No. of Screws | 2 |
| Material | Steel |
| Hardened Teeth | Without Hardened Teeth |
| Finished Bore | N/A |
| Type | DF-1 |
| Hub Dia. | 0.937 in |
| Bore Range [Min] | 1/4 in |
| Outside Dia. | 1.2530 in |
| Weight | 0.18 LB |
| EAN or UPC | 697950109817 |
