Find a Service Center
- 0.375 in Belt Pitch
- 0.75 in Belt Width
- 16 Number of Teeth
- 1.88 in Outside Diameter
- L075 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | None |
| Set Screw Size | 1/4-20 x 1/4 |
| Bore Range [Min] | 0.5 in |
| Belt Pitch | 0.375 in |
| Bushing Series | N/A |
| Hub Dia. | 1.437 in |
| Type | PB |
| Length Through Bore | 1.625 in |
| Material | Steel |
| Pitch Diameter | 1.91 in |
| Outside Dia. | 1.88 in |
| Hub Type | B |
| Finished Bore | N/A |
| Hardened Teeth | Without Hardened Teeth |
| No. of Teeth | 16 |
| Bore Type | Bushed |
| No. of Screws | 1 |
| Bore Range [Max] | 1.125 in |
| Belt Size | L075 |
| Belt Width | 0.75 in |
| Hub Projection | 5/8 in |
| Weight | 1.0 LB |
| EAN or UPC | 697950101019 |
