Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 14 Number of Teeth
- 2.174 in Outside Diameter
- H100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Finished Bore | N/A |
| Type | PB |
| Pitch Diameter | 2.228 in |
| Hardened Teeth | With Hardened Teeth |
| Belt Pitch | 1/2 in |
| Bushing Type | None |
| Hub Type | B |
| Outside Dia. | 2.1740 in |
| Bore Range [Max] | 1 in |
| Bushing Series | N/A |
| Length Through Bore | 1.937 in |
| Hub Dia. | 1 1/2 in |
| Belt Size | H |
| No. of Teeth | 14 |
| Hub Projection | 5/8 in |
| Belt Width | 1 in |
| Bore Range [Min] | 5/8 in |
| Material | Steel |
| Bore Type | Reborable |
| Weight | 1.4 LB |
| EAN or UPC | 697950150918 |
