Find a Service Center
- 7.7" Maximum Diameter
- 2.9" Stroke Length
- 2.3" Compressed Height
- 1/4" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
| Air Inlet Type | NPT |
| Convolutions | Single |
| Bellows Type | Single Convolution |
| Force @ 8 in Stroke | N/A |
| Blind Tap Spacing | 2 3/4 in |
| Force @ Stroke (80 psi) | 2500 lbf @ 1 in, 2500 lbf @ 2 in, 800 lbf @ 3 in |
| Temperature Range [Min] | -40 °F |
| Force @ 12 in Stroke | N/A |
| Force @ 1 in Stroke | 2300 lbf |
| End Plate Diameter | 4.15 in |
| Pressure [Max] | 100 psi |
| Force @ 5 in Stroke | N/A |
| Temperature Range [Max] | 150 °F |
| Force @ 3 in Stroke | N/A |
| Force @ 4 in Stroke | N/A |
| Force @ 9 in Stroke | N/A |
| Force @ 2 in Stroke | 1750 lbf |
| Air Inlet | 1/4 in |
| Stroke Length [Max] | 2.900 in |
| Recommended Isolator Design Height [Max] | 4 1/2 in |
| Force @ Maximum Stroke (80 psi) | 850 lbf |
| Compressed Height | 2 in |
| Bumpers | w/Bumpers |
| End Closure | Style 3 End Retainer |
| Recommended Isolator Design Height [Min] | 3 1/2 in |
| Force @ 6 in Stroke | N/A |
| Fill Port Offset | 1 3/8 in |
| Style No. | YI-1B |
| Weight | 3.7 LB |
