Find a Service Center
- 6 1/2" Maximum Diameter
- 4" Stroke Length
- 1.8" Compressed Height
- 1/4" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
| Force @ 3 in Stroke | 440 lbf |
| Air Inlet Type | NPT |
| Recommended Isolator Design Height [Max] | 5 in |
| Force @ Stroke (80 psi) | 1500 lbf @ 1 in, 1150 lbf @ 2 in, 440 lbf @ 3 in |
| Force @ 12 in Stroke | N/A |
| Stroke Length [Max] | 3 in |
| Force @ Maximum Stroke (80 psi) | 440 lbf |
| Force @ 6 in Stroke | N/A |
| Bellows Type | Single Convolution |
| Compressed Height | 1.8 in |
| End Closure | Style 2 End Retainer |
| Temperature Range [Max] | 150 °F |
| Convolutions | Single |
| Pressure [Max] | 100 psi |
| Force @ 2 in Stroke | 1150 lbf |
| Air Inlet | 1/4 in |
| Force @ 4 in Stroke | 1500 lbf |
| End Plate Diameter | 3.4 in |
| Blind Tap Spacing | 1 3/4 in |
| Force @ 8 in Stroke | N/A |
| Force @ 1 in Stroke | 1500 lbf |
| Force @ 9 in Stroke | N/A |
| Style No. | YI-1B |
| Temperature Range [Min] | -40 °F |
| Bumpers | w/o Bumpers |
| Recommended Isolator Design Height [Min] | 3 1/2 in |
| Force @ 5 in Stroke | N/A |
| Weight | 1.4 LB |
