These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Crossover
All Ports Blocked
Surge Suppressor/Damper
None
Mechanical Options
None
Solenoid Energization Code
None
Spool Shift Timing
N/A
Actuator Type
Solenoid
Seal Material
Buna-N
Pressure Port Check Valve Pressure
N/A
Coil Type
DIN 43650
Reducer Module
N/A
Solenoid Code
B
Valve Type
High-Performance
Overrides
No Overrides
Spool Indicator Switch Code
None
Coil Rating Code
B
Rated Flow [Max]
21 gal/min
Pressure [Max]
5075 psi
Solenoid Indicator Lights Code
None
Indicator Lights
No
Manual Override Option Code
H
Function Code
2
EN Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Pilot/Drain
None
Port T Pressure Rating
3000 psi
Response Type
Standard Response
NFPA Size
D03
Port Restrictor Plugs
None
Coil Type Code
U
Electrical Connector Code
None
Surge Suppressor/Damper Code
None
Cycle Rate [Max]
N/A
Port Restrictor Plug Code
None
Housing Code
None
AC/DC
AC
Electrical Connection
DIN 43650
Spool Code
2
Function
2-Position Spring Offset, End to End
Electrical Options
None
Design No.
60
Port T Code
6
Center Position
All Ports Blocked
Pilot Valve Type
N/A
Solenoid
Single
Spool Spring Arrangement Code
A
Operation
Solenoid Operated
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
