These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
EN Code
None
Solenoid Energization Code
None
Coil Rating Code
B
Pilot/Drain
None
Valve Type
High-Performance
Manual Override Option Code
None
Spool Spring Arrangement Code
BL
Spool Shift Timing
N/A
Crossover
All Ports Open
Pressure [Max]
5075 psi
Response Type
Standard Response
Coil Type
DIN 43650
Overrides
No Overrides
Port T Code
6
NFPA Size
D03
Coil Type Code
U
Housing Code
None
AC/DC
AC
Pressure Port Check Valve Pressure
N/A
Reducer Module
N/A
Indicator Lights
No
Port T Pressure Rating
3000 psi
Solenoid Indicator Lights Code
None
Actuator Type
Solenoid
Center Position
All Ports Open
Seal Material
Buna-N
Function Code
0
Operation
Solenoid Operated
Voltage & Frequency
110/120 VAC – 50/60 Hz
Mechanical Options
None
Port Restrictor Plugs
None
Surge Suppressor/Damper
None
Spool Code
0
Function
2-Position Spring Offset, End to Center
Pilot Valve Type
N/A
Design No.
60
Electrical Connection
DIN 43650
Solenoid Code
B
Port Restrictor Plug Code
None
Solenoid
Single
Cycle Rate [Max]
N/A
Surge Suppressor/Damper Code
None
Rated Flow [Max]
21 gal/min
Electrical Connector Code
None
Electrical Options
None
Spool Indicator Switch Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
