These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Mechanical Options
None
Overrides
No Overrides
Solenoid Energization Code
None
Crossover
All Ports Blocked
Pressure Port Check Valve Pressure
N/A
Spool Code
2
Rated Flow [Max]
21 gal/min
Function Code
2
Electrical Options
None
Port T Code
7
Surge Suppressor/Damper
None
Solenoid
Double
Valve Type
High-Performance
Spool Spring Arrangement Code
N
Design No.
60
Solenoid Indicator Lights Code
L
Manual Override Option Code
None
Operation
Solenoid Operated
Surge Suppressor/Damper Code
None
Pressure [Max]
5075 psi
Port Restrictor Plug Code
None
AC/DC
DC
Pilot Valve Type
N/A
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
EN Code
None
Spool Shift Timing
N/A
Coil Rating Code
H
Coil Type Code
F
Pilot/Drain
None
Seal Material
Buna-N
Response Type
Standard Response
Port Restrictor Plugs
None
Solenoid Code
H
Indicator Lights
Yes
Cycle Rate [Max]
N/A
Center Position
All Ports Blocked
Actuator Type
Solenoid
Reducer Module
N/A
Electrical Connector Code
T
Electrical Connection
Wired Terminal Block
Port T Pressure Rating
3000 psi
Spool Indicator Switch Code
None
NFPA Size
D03
Housing Code
W
Function
3-Position Detented
Voltage & Frequency
24 VDC
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
