These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Single
Manual Override Option Code
None
Electrical Connection
DIN 43650
Crossover
All Ports Blocked
Pilot Valve Type
N/A
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plugs
None
Reducer Module
N/A
Function Code
2
Pressure [Max]
5075 psi
Port T Code
6
Port Restrictor Plug Code
None
Operation
Solenoid Operated
EN Code
None
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
AL
Actuator Type
Solenoid
Cycle Rate [Max]
N/A
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper
None
Overrides
No Overrides
Coil Type
DIN 43650
Coil Type Code
U
AC/DC
AC
Indicator Lights
No
Pilot/Drain
None
Response Type
Standard Response
Spool Code
2
NFPA Size
D03
Solenoid Energization Code
None
Electrical Options
None
Port T Pressure Rating
3000 psi
Solenoid Code
B
Function
2-Position Spring Offset, End to End
Spool Shift Timing
N/A
Solenoid Indicator Lights Code
None
Seal Material
Buna-N
Coil Rating Code
B
Center Position
All Ports Blocked
Design No.
60
Valve Type
High-Performance
Mechanical Options
None
Electrical Connector Code
None
Housing Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Surge Suppressor/Damper Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
