Find a Service Center
- Solenoid Actuated Valve
- Pilot Operated Operation
- D08 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DG5V-8 models are two-stage directional control valves having an integrally-mounted wet armature solenoid pilot valve. These valves are generally used to control the movement of a work cylinder or the rotation of a fluid motor.
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Tank Port Rating | 5000 |
| Spool Control Modification Code | None |
| Solenoid Energization Code | None |
| Pilot Pressure Code | None |
| Function | 3-Position Spring Centered |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Reducer Module Code | None |
| Port Restrictor Plug Code | None |
| Pressure [Max] | 5000 psi |
| Pilot Valve Type Code | H |
| Design No. | 10 |
| Housing Code | W |
| Surge Suppressor/Damper Code | None |
| Manual Override | Plain Override |
| Model No. | DG5V-8-H-6C-M-FW-B-10 |
| Reducer Module | No |
| Rated Flow [Max] | 175 gal/min |
| Spool Code | 6 |
| Coil Type Code | F |
| Performance | High Performance |
| Fluid Cleanliness | 19/17/14 micron |
| Leakage | Standard Performance |
| Surge Suppressor/Damper | None |
| Pressure Port Check Valve Pressure | N/A |
| No. of Stages | Two Stage |
| Valve Type | Standard-Duty |
| Spool Spring Arrangement Code | C |
| Pilot Valve Type | CETOP 3, High Performance |
| Operation | Pilot Operated |
| Seal Material | Buna-N |
| Mechanical Options | None |
| Gauge Ports Code | None |
| Indicator Lights | No |
| Compatible Fluids | Petroleum Oil |
| Solenoid | Double |
| Coil Rating Code | B |
| AC/DC | AC |
| Gauge Port | SAE-4 |
| NFPA Size | D08 |
| Electrical Connection | No Connector |
| Electrical Connector Code | None |
| Port Restrictor Plugs | None |
| Overrides | Plain Override Solenoid Ends |
| Electrical Options | None |
| Body Material | Gray Iron |
| Solenoid Indicator Lights Code | None |
| Port T Pressure Rating | 5000 psi |
| Pilot Drain Code | None |
| Coil Type | Flying Leads, 1/2 in NPT Thread Wiring Housing |
| Gauge Port Thread Type | 7/16 - 20 UNF, SAE Thread |
| Center Position | P Blocked, A & B to T |
| Pressure Port Check Valve Code | None |
| Crossover | P Blocked, A or B to T |
| Mounting | Subplate/Manifold Mount |
| Spool Center Condition | A Port and Double Offset sensing switch on B Port |
| EN Code | None |
| Manual Override Option Code | None |
| Response Type Code | None |
| Mechanical Options Code | None |
| Actuator Type | Solenoid |
| Response Type | Standard Response |
| Spool Indicator Switch Code | None |
| Electrical Options Code | None |
| Pilot/Drain | External Pilot/Internal Drain |
| Weight | 35.0 LB |
